J. S. WOODCRAFTS

Home Up Feedback Ordering Info

Animated-Motorized
Animated-Motorized Engine Houses Industrial Rural Southwestern Track Side

 

 

Any assembly below can include a hand held remote control for on and off operation - $35.00

Description Footprint Price Click on Picture to Enlarge
Horizontal Boiler

Options:
Extra Piping Available
For Smoke add $85.00

7 x 8 $35.00 Kit

$65.00 Fully Assembled & Painted

 

Horizontal Boiler-View 1.jpg (250308 bytes)

Horizontal Boiler-View 2.jpg (184929 bytes)

Motorized Winch   $85.00 includes transformer and reverse switch Motorized Winch.jpg (101381 bytes)
Motorized Vertical Dragsaw

Options:
Canopy roof $44.00 (adds 4 inches to height)
For Smoke add $85.00

22 x 12 x 12

(With Canopy)

$575.00 (without Canopy Roof)

 

Figures and Woodpile Not Included

Motorized Vertical Dragsaw - View 1.jpg (121447 bytes)

Motorized Vertical Dragsaw - View 2.jpg (149852 bytes)

Motorized Vertical Dragsaw - View 3.jpg (162729 bytes)

Motorized Vertical Dragsaw - View 4.jpg (180044 bytes)

Movie of Motorized Vertical Dragsaw

 

Rock Crusher Diorama Look below for individual components $550.00

(Figures not included)

Rock Crusher Diorama.jpg (125436 bytes)

Movie of Rock Crusher Diorama

 

Boiler

Can be purchased as a kit or fully assembled and painted

For Smoke add $85.00

Figure shown is not included

2 1/2 x 8 $45.00 Kit

$75.00 Fully Assembled & Painted

Boiler.jpg (43155 bytes)

Movie of Boiler

 

Geared Steam Engine

Can be purchased as a kit or fully assembled and painted

4 1/2 x 2 1/2 x 4 1/2 $55.00 Kit (no motor or transformer)

$150.00 Fully Assembled & Painted with Transformer and Motor

Geared Steam Engine - View 1.jpg (61906 bytes)

Geared Steam Engine - View 2.jpg (64855 bytes)

Movie of Geared Steam Engine

 

Rock Crusher

Can be purchased as a kit or fully assembled and painted

Flywheels turn freely
5 1/2 x 3 x 3 $45.00 Kit

$75.00 Fully Assembled & Painted 

 
Rock Crusher - View 1.jpg (77188 bytes)

Rock Crusher - View 2.jpg (74586 bytes)

250 HP Dynamo
Simulated magnetos come pre-wound in blue 24 gauge wire
All wires from magnetos to wiring bus are pre-installed
Armature shaft is mounted in sealed ball bearings on the pillow blocks
The overall diameter of the magneto housing assembly is 10.5 inches
The five-spoke magneto wheel is 7 inches in diameter
There is a simulated fire in the brick boiler, which is included
The assembly comes with a rheostat to control RPM

Options:
6 volt transformer $10.00
Brick boiler with simulated fire may be purchased separately $85.00

20 x 12 x 8 $685.00

Now $450.00

250 HP Dynamo.jpg (98667 bytes)

 

Movie of 250 HP Dynamo

Auger Loader
Flip a switch to load a car with the product
Recommended product is real soybeans
A corded reversing switch box is included

Options:
12 volt transformer $10.00

12 x 16 x 25 Was $325.00

Now $150.00

Auger Loader.JPG (51894 bytes)

Movie of Auger Loader

Bear Valley Foundry
Gray stucco with primer red trim
Black rock roof
Double entry doors and a roll-up cargo door embellish the front
What makes this building so unique is the incredible amount of smoke the stacks put out when you add the smoke option

Options:
Sound and Lights $70.00
Smoke $110.00 (Operates on 110 volts)
12 volt transformer $10.00

23 x 10 x 19 $238.00 Bear Valley Foundry.jpg (48226 bytes)

Movie of Bear Valley Foundry

Blacksmith Shop
Animation of the Blacksmith hammering on the anvil
The hearth has lit flickering coals
All accessories shown are included
20 x 8 x 7 $385.00 Blacksmith Shop - View 1.jpg (98318 bytes)

Blacksmith Shop - View 2.jpg (115195 bytes)

Blacksmith Shop - View 3.jpg (146967 bytes)

Blacksmith Shop - View 4.jpg (160861 bytes)

Movie Of Blacksmith Shop

New Slack Line
Stock length of slack line is six feet.  Additional footage add $2.50 per foot
No counterweight is needed on the this new and improved slack line
The assembly comes fully powered.  Transformer add $15.00
For the boiler and the piston add $90.00

 

  $295.00 New Slackline-View 1.jpg (439759 bytes)

New Slackline-View 2.jpg (342460 bytes)

New Slackline-View 3.jpg (443465 bytes)

Slack Line
Included are 2 platforms, 30 inch cable, carriage and the pulleys for operation
A winch moves the carriage from platform to platform via a counterweight hanging below the right platform.  This counterweight must be free hanging inside a tube, which is approximately 30 inches long.  The tube is normally buried up to the bottom of the platform.
The winch is NOT included

Options:
The second picture shown is what we refer to as "The Cliff Hanger".  This item replaces the right hand platform in the slack line above.  This item enables you to hang the supplied counterweight box over a cliff or drop off.  Add $10.00

23 x 10 x 19 $138.00 Slackline.jpg (73852 bytes)

Cliff Hanger:

Cliffhanger.jpg (108337 bytes)

Movie of Slack Line

Portable Steam Winch
Portable winch for slack line, cliff hanger or small mine head; or for any winch application

Options:
3 volt transformer $10.00
Reverse box with 10 foot cord $15.00

5.5 x 9 x 7 $158.00 Portable Steam Winch.jpg (56891 bytes)

Movie of Portable Steam Winch

Grist Mill
Flip a switch to make the wheel turn as you release the water to cascade over it
Included are the water wheel, braces, the mill, the porch and a 22 inch water sluice
Building and sluice are medium brown stain
The water wheel is sealed medium brown paint

Options:
3 volt transformer $10.00
Additional 22 inch sluice $68.00
Control box with cord $12.00
Water pump with hook-up $30.00

 

17 x 20 x 27 $395.00 Grist Mill - View 1.jpg (80338 bytes)

Grist Mill - View 2.jpg (81760 bytes)

Movie of Grist Mill Waterwheel

Portable Oil Pump
Apply voltage and the pump rod moves up and down

Options:
(1) Fully motorized oil pump with skids and transformer $225.00
(2) Complete oil pump diorama which includes the oil pump, skids, rock box, wellhead, pump rod, runoff bucket and transformer $285.00

9.5 x 5.5 x 10 Option 1: $225.00

Option 2: $285.00

Portable Oil Pump - View 1.jpg (73276 bytes)

Portable Oil Pump - View 2.jpg (68532 bytes)

Movie of Portable Oil Pump

Motorized Horsehead Pump
Available in industrial green or black
Apply voltage and the horsehead moves up and down

Options:
Horsehead pump and chain link package, includes 3 volt transformer $302.00
 
Chain link fence only $12.00 per foot
Control box with 10 foot cord $12.00

 

14 x 4 x 10 $264.00 (includes 3 volt transformer) Horsehead Pump.jpg (25032 bytes)

Horsehead Pump with Fence.jpg (21474 bytes)

Movie of Horsehead Pump

Mine Head
Dual pistons, large and small gears and 2 pulley's supply the action
The mine platform moves up and down

Options:
Smoke with an extended boiler $85.00
Sound $55.00
Automatic up and down (continuous movement) $45.00
Delayed automatic up and down $120.00
12 volt transformer $10.00

 

10 x 22 x 14 $358.00 Mine Head.jpg (81002 bytes)

Movie of Mine Head Platform

Steam Donkey (Oil Fired)
Flip the switch and the piston, sprockets, and take-up spools turn
Included are control valve with steam lines, four oil barrels, and a block and tackle with balance bar for lifting the barrels
The roof is rough sawn redwood

Options:
12 volt transformer $10.00
Canopy light $6.00
Control box with switches and 10 foot cord $18.00
Sound $55.00

12 x 6 x 7 $248.00 Oil Fired Donkey - View 1.jpg (93798 bytes)

Oil Fired Donkey - View 2.jpg (90123 bytes)

Movie of Oil Fired Donkey

Motorized Saw Mill

Standard Includes:
Base
Rope drawn log carriage with two pulleys
Rotating saw blade with pillow block
1 piston with steam line and valves
Gear housing and boiler
Log holding table
Deluxe Includes Standard Package Plus:
2 more pillow blocks
1 additional piston with steam chest
1 sawdust and 1 fire barrel
Storage shack
Drive gears and idler pulley
Motorized chain and sprocket drive which automatically moves the log carriage from one end of the track to the other
Deluxe with Sound:
As the log carriage meets blade the sound module turns on (large saw cutting) and as it leaves the blade the sound module turns off

Options:
Canopy roof $44.00 (adds 4 inches to height)
For Smoke add $85.00

28 x 10 x 8 (without Canopy Roof)

 

 

 

 

$434.00

 

 

$594.00

 

 

 

$678.00

 

 

 

 

 

Saw Mill - View 4.jpg (23367 bytes)

Saw Mill - View 1.jpg (51453 bytes)

Saw Mill - View 2.jpg (44073 bytes)

Saw Mill - View 3.jpg (49222 bytes)

Movie of Saw Mill

Motorized Stamp Mill
Stamp heads are alternately lifted and released as large wheel rotates
The piston, drive arm and idler wheel supply more action

Options:
12 volt transformer $10.00
Canopy light $6.00
Control box with switches and 10 foot cord $18.00
Smoke $85.00

10 x 12 x 13 $288.00 Stamp Mill.jpg (104858 bytes)

Stamp Mill - Piston Close Up.jpg (89683 bytes)

Movie of Stamp Mill

Steam Powered P.T.O.
Flip the switch and the piston, gears, chain and sprocket turn
Included are front guide rollers, water barrel and woodpile
Available with P.T.O. spool or a take-up spool
The donkey has a stained cedar timber roof

Options:
3 volt transformer $10.00
Canopy light $6.00
Control box with switches and 10 foot cord $18.00

12 x 6 x 7 $176.00 Steam Powered PTO - View 1.jpg (110232 bytes)

Steam Powered PTO - View 2.jpg (91295 bytes)

Movie of PTO

Sure Grip Tire Company
This diorama has sound, smoke and a timer
Has a built-in timer allowing one full rotation of the forklift before it stops for approximately 30 seconds and then resumes
Has a built-in fail safe switch allowing the doors to open
Diorama comes complete with all items needed to operate it

ONE OF A KIND BUILDING

32 x 17.5 x 11 Was $875.00

Now $375.00

Sure_Grip_Tire_Company.jpg (49429 bytes)

Movie of Sure Grip Tire

Stationary Steam Engine - Motorized
The fly wheel, idler wheel, piston and governor are the parts that move on the engine
The RPM is controlled by a rheostat supplied with the engine
The unit runs on a 6 volt DC transformer

Options:
6 volt transformer $10.00

8.5 x 4 x 6 $295.00 Stationary Steam Engine - Motorized.jpg (42098 bytes)

Movie of Stationary Steam Engine

Dynamo
Simulated magnetos come pre-wound in blue 24 gauge wire
All wires from magnetos to wiring bus are pre-installed
Armature shaft is mounted in sealed ball bearings on the pillow blocks
Unit comes with the drive belt
Great accessory for Stationary Steam Engine
6 x 6 x 6 $285.00

Now $200.00

Dynamo - Front View.jpg (54885 bytes)

Dynamo - Rear View.jpg (51953 bytes)

Movie of Dynamo

Dynamo II
Same as Dynamo above, except has built in generator on the armature.

 

6 x 6 x 6 $245.00

Now $175.00

Dynamo II - View 1.jpg (69527 bytes)

Dynamo II - View 2.jpg (57516 bytes)

Tipple Loader
Flip a switch to load a car with the product
Included is 10 pounds of coal or ore
Drop mechanism is installed and ready for use

Options:
Control box with switch and 10 foot cord $12.00
12 volt transformer $10.00

15 x 10 x 28 $278.00 Tipple.JPG (103665 bytes)
Oil Derrick with Walking Beam with Optional Storage Tank
Walking beam is motorized allowing it to move up and down in a pumping motion
All wood is medium brown stain
Derrick parts are included but are unassembled and unpainted (catwalk is assembled and painted)

Options:
3 volt transformer $10.00
Storage Tank $15.00
Assembled and painted Derrick $20.00

20 x 9 x 21 $288.00 Walking Beam.jpg (101497 bytes)

Walking Beam - Beam.jpg (53448 bytes)

Walking Beam - Walkway.jpg (54985 bytes)

Movie of Walking Beam

Steam Donkey (Wood Fired)
Flip the switch and the piston, gears, P.T.O. and take-up spools turn
Includes boiler, woodpile and steam valve
Roof is primer red

Options:
12 volt transformer $10.00
Canopy light $6.00
Control box with switches and 10 foot cord $18.00

12 x 6 x 8 $228.00 Wood Fired Donkey - View 1.jpg (43676 bytes)

Wood Fired Donkey - View 2.jpg (48215 bytes)

Movie of Wood Fired Donkey

 

 

Home ] Up ]

Send e mail to JSWoodcrafts@sbcglobal.net with questions or comments about this web site or products.
Last modified: September 20, 2015